GT5-10

For anyone who likes to crank it up in the car, the new JBL® high-output GT5-10 Subwoofer is the real deal. The JBL GT5-10 Subwoofer features a single 4-ohm voice Coil and a vented Motor structure, and offers 1100 watts of Peak Power handling. The GT5-10 also features JBL’s newest design, combining classic elements with modern ones.

GT5-12

For anyone who likes to crank it up in the car, the new JBL® 305mm (12") high-output GT5-12 Subwoofer is the real deal. The JBL GT5-12 Subwoofer features a single 4-ohm voice Coil and a vented Motor structure, and offers 1100 watts of Peak Power handling. The GT5-12 also features JBL’s newest design, combining classic elements with modern ones.

JBL BassPro2 - Big Bass,Small Space Powered Subwoofer

100-watt, four-channel amplifier driving a unique quad-voice coil 165mm subwoofer.Single-vented band pass box design - makes the most efficient use of the amplifiers output watts and translates them into a deep and impulsive bass Closed rear chamber - for extremely high power handling Front- and rear-rounded vent - keeps away air-stream noise MDF panel - guarantees high stability and long durability even under extreme conditions 12 dB/octave electronic low pass filter with selectable 70Hz-100Hz crossover frequency for precise frequency division to match any system Line-level and speaker-level Inputs to integrate seamlessly with virtually any factory-installed head unit Variable input sensitivity for compatibility with all source units and factory head units Input for a separate Remote Level Control (optional) to control the output level of the BassPro directly from the dashboard of the car. Effective protection circuitry against short circuit, overheating and over-current High-quality power, input and output connectors for clean, tight, long-lasting connections Power-On indicator led for visible indication of amplifier status

JBL GTO1214BP -1400w Band-Pass Enclosure With Built-In LED Illumination

No one has as much experience designing and building Subwoofer enclosures as JBL, Inc. JBL® Speaker enclosures have traveled thousands of miles while on tour with some of the world's top bands, and have filled stadiums, auditoriums and local clubs with rockin' Bass for half a century. JBL car audio Subwoofer enclosures are built to the same exacting standards as the brand's professional boxes, and are designed to be rugged as well as to Sound great. JBL GTO enclosures feature 3/4" medium-density-fiberboard (MDF) construction, high-quality binding-post terminals and GTO woofers. Unlike so many one-note-wonder enclosed subwoofers, GTO enclosures feature a wide Bandwidth design, which provides more output between 20Hz and 40Hz, and ensures you get all the Bass you've paid for.• Subwoofer type: GTO1214 • Power handling, RMS: 350W • Power handling, peak: 1400W • Frequency response: 30Hz – 150Hz • Sensitivity (2.83V @ 1m): 93dB • Impedance: 4 ohms • Dimensions (L x D x H): 626mm x 423mm x 420mm (24-5/8” x 16-5/8” x 16-1/2”) • Aluminum die-cast basket • Slipstream port design

JBL GT5-2404BR - 1600w Preloaded Ported Enclosure

The JBL® GT5-1204BP provides superior performance compared to that of competing loaded enclosures, primarily because of its revolutionary Slipstream port, which provides lots of surface area outside the box so that the air stays stuck together – our engineers have named it the Adverse Pressure Gradient.™ This gradual change from high pressure to low pressure eliminates the audible distortion called “whacking." Because the area of the port in the middle is much smaller than the mouth of the port, the port can be MUCH shorter than a cylindrical port with a surface area the same as the Slipstream port's mouth; this means it can fit into regular boxes. Stickiness outside the box is maximized by increasing pressure, and stickiness inside the port is minimized by reducing velocity. The benefit of this proprietary technology is more bass output with greatly reduced port noise and distortion.

JBL GTO1214BR - Loaded Enclosure 1200w

Elegant design – Black-lacquered front, and slipstream port.Aluminum grille – Looks great and offers a high level of woofer-cone protection.Optimized acoustics – The large profile of the slipstream port limits port noise efficiently.Powerful bass – Perfectly tuned to the in-car environment, this box is optimized for a tight and precise bass response. Specifications General Type Bass-Reflex Subwoofer Type GTO1202D (300mm) Power Handling, RMS 300W Power Handling, Peak 1200W Sensitivity (2.83V/1m) 94dB Frequency Response 35Hz ? 300Hz Impedance 4 Ohms Dimensions (H x W x D) 626mm x 420mm x 321mm

JBL GTO Series 2Ch Amp +1200w 12" Sub + Wiring Kit

GTOBASSPK122C - JBL GTO Series Bass Package - Everything you need to add some Power Packed Performance in 1 Box! JBL GTO752 Class AB 2 x 75W RMS at 4ohm 2 x 110W RMS at 2ohm Frequency Response: 10 Hz - 100 kHz ( -3dB ) THD+N: 0,07% S/N Ratio: 108dB Variable Electronic crossover Dimensions: 312 x 264 x 54 mm JBL GTO1204BR bassbox Power max.: 1200W Power rms.: 300W Impedance: 4 Ohm: 93dB Frequency Response: 35-300 Hz Dimensions. (B x H x D): 520 x 370 x 414 mm + FREE JBL Complete Amplifier Connection Wiring Kit

JBL W10GTi - 10" Differential Drive 3000w Subwoofer

The W10GTIE is truly the first in-car bass units that can provide the sheer output required for winning SPL contests while accurately reproducing the low frequency content of any program material. This 25cm GTi subwoofer handles 3000W peak- more power than any other car audio sub can handle.It has a differential drive design which is an important advancement in subwoofer motor technology. The new designs enables W10GTiE sub to use a pair of smaller and lighter 76mm-diameter voice coils hence provides significantly higher power handling through increased surface area and maintains low-moving mass not possible through with larger coils. The Kevlar- impregnated paper woofer cone has been selected for its high strength to weight ratio whereas the Nitrile-Butylene rubber provides an optimum blend of elasticity and internal damping. An additional cooling is provided to the motor structure and also consists the Progressive Spider that provides better control at excursion limits than a linear spider. The benefit of this is that it reduces distortion at high output levels. Key features: * Sensitivity: 92dB @ 2.83V/1m * Power Handling: 600W RMS, 3,000W Peak * Impedance: 3 or 12 ohms * Frequency Response: 20Hz ~ 1kHz * Voice-Coil Diameter: 3" (76mm) * Mounting Depth: 9-1/8" (232mm) * Overall Diameter: 10-1/2" (254mm) * Cut-Out Diameter: 9-3/16" (233mm) * Displacement: 0.108 ft3 (3.06 l)

JBL-W12GTi - 12" Differential Drive 4000w Subwoofer

The engineers at JBL had only one goal in mind when designing the GTi Series. Design the best subwoofer money can buy. At the core of the GTi subwoofers is JBL’s Differential Drive Design (DDD). Originally developed by JBL for use in their professional loudspeakers, this important advancement in subwoofer technology enables the GTi subwoofer to use a pair of smaller and lighter 3-inch voice coils. It's always cheaper at www. alphacaraudio.co.uk. This stacked. dual coil configuration provides significantly higher power handling through increased surface area and maintains the low moving mass not possible with larger coils. Besides the benefits of improved thermal handling, JBL’s DDD maximizes the woofer’s linear excursion, making it an ideal SPL subwoofer. Symmetrical Field Geometry (SFG) provides symmetrical magnetic fields above and below the magnetic gap for significantly reduced distortion at high excursion. To accommodate DDD, JBL designed and built a cutting-edge cone and basket assembly using Finite Element Analysis. For an optimal blend of elasticity and and internal damping, GTi subwoofers use Nitrile-butylene surrounds. The cone is Kevlar impregnated paper for incredible transient response. The GTi’s frame is a custom-tooled deep draw design, with thick-wall construction for maximum rigidity. Differential Drive® Design (DDD) motor Die-cast vented basket Kevlar®-impregnated paper woofer cone Nitrile-butylene surround Power handling RMS: 700 watts Power handling Peak: 4,000 watts Cut-out diameter: 11" Mounting depth: 10-1/4" Sensitivity: 91dB Dual 6-ohm voice coils

JBL W15GTi - 15" Differential Drive 5000w Subwoofer

The engineers at JBL had only one goal in mind when designing the GTi Series. Design the best subwoofer money can buy. At the core of the GTi subwoofers is JBL’s Differential Drive Design (DDD). Originally developed by JBL for use in their professional loudspeakers, this important advancement in subwoofer technology enables the GTi subwoofer to use a pair of smaller and lighter 3-inch voice coils. It's always cheaper at www. alphacaraudio.co.uk. This stacked. dual coil configuration provides significantly higher power handling through increased surface area and maintains the low moving mass not possible with larger coils. Besides the benefits of improved thermal handling, JBL’s DDD maximizes the woofer’s linear excursion, making it an ideal SPL subwoofer. Symmetrical Field Geometry (SFG) provides symmetrical magnetic fields above and below the magnetic gap for significantly reduced distortion at high excursion. To accommodate DDD, JBL designed and built a cutting-edge cone and basket assembly using Finite Element Analysis. For an optimal blend of elasticity and and internal damping, GTi subwoofers use Nitrile-butylene surrounds. The cone is Kevlar impregnated paper for incredible transient response. The GTi’s frame is a custom-tooled deep draw design, with thick-wall construction for maximum rigidity. Differential Drive® Design (DDD) motor Die-cast vented basket Kevlar®-impregnated paper woofer cone Nitrile-butylene surround Power handling RMS: 800 watts Power handling Peak: 5,000 watts Mounting depth: 10-1/4" Cut-out diameter: 13-7/8" Dual 6-ohm voice coils Sensitivity: 92dB

JBL GTO1202D - 12",1200W SUBWOOFER

SPECIFICATIONS Power Handling: RMS 300 Watts Power Handling: Peak 1200 Watts Sensitivity: 93dB Impedance: 1 or 4 Ohms depending on wiring Mounting Depth: 5-1/16" Cutout Diameter: 11-3/16"

JBL GTO Series 4ch Amp +1200w 12" Sub + Wiring Kit

GTOBASSPK124C - JBL GTO Series Bass Package - Everything you need to add some Power Packed Performance in 1 Box! JBL GTO504 Class AB 4 x 55 w RMS ot 4 ohm 4 x 70 w RMS ot 2 ohm Frequency Response:: 10 Hz - 100kHz ( -3dB ) THD+N: 0,02% S/N Ratio: 105dB Dynamic Bass Optimizer Variable Electronic crossover Dimensions: 351 x 264 x 54 mm JBL GTO1204BR bassbox Power max.: 1200W Power rms.: 300W Impedance: 4 Ohm: 93dB Frequency Response: 35-300 Hz Dimensions. (B x H x D): 520 x 370 x 414 mm + FREE JBL Complete Amplifier Connection Wiring Kit

JBL GTO Series Mono Amp +1200w 12" Sub + Wiring Kit

GTOBASSPK121C - JBL GTO Series Bass Package - Everything you need to add some Power Packed Performance in 1 Box! JBL GTO3501 Class AB 225W RMS x 1 Channels at 4 Ohms 360W RMS x 1 Channels at 2 Ohms Signal-to-Noise (dBA) 104dBA (reference rated power into 4 ohms) THD 0.04% (rated power at 4 ohms) Frequency Response 20Hz - 330Hz (-3dB) Dimensions (L x W x H) 12-1/4" x 10-3/8" x 2-1/8" JBL GTO1204BR bassbox Power max.: 1200W Power rms.: 300W Impedance: 4 Ohm: 93dB Frequency Response: 35-300 Hz Dimensions. (B x H x D): 520 x 370 x 414 mm +FREE JBL Complete Amplifier Connection Wiring Kit

GT5-650C

* Proprietary Plus One« cones * Vented woofer motor structure * Titanium-laminate tweeter * Edge-driven tweeters (component systems) * Outboard crossovers (component systems) * Improved I-Moun™ (patent no. 5,859,917) tweeter-mounting system Size-165mm Nominal Impedance-4 Ohms Power Handling, Peak-120W Power Handling, RMS-40W Sensitivity (2.83V/1m)-91dB Frequency Response=70Hz – 20kHz Mounting Depth-53mm

GT5-963

# Size 6" x 9" # Nominal Impedance 4 Ohms # Power Handling, Peak 210W # Power Handling, RMS 70W # Sensitivity (2.83V/1m) 91dB # Frequency Response 50Hz – 20kHz # Mounting Depth 72mm # Proprietary Plus One cones # Vented woofer motor structure # Titanium-laminate tweeter # Rubber magnet protection # Improved I-Mount tweeter-mounting system

GT5-500C

* Proprietary Plus One« cones * Vented woofer motor structure * Titanium-laminate tweeter * Edge-driven tweeters (component systems) * Outboard crossovers (component systems) * Improved I-Moun™ (patent no. 5,859,917) tweeter-mounting system Size-130mm Nominal Impedance-4 Ohms Power Handling, Peak-90W Power Handling, RMS-30W Sensitivity (2.83V/1m)-91dB Frequency Response=75Hz – 20kHz Mounting Depth-47mm

GT5-652

Size-130mm Nominal Impedance-4 Ohms Power Handling, Peak-90W Power Handling, RMS-30W Sensitivity (2.83V/1m)-91dB Frequency Response=75Hz – 20kHz Mounting Depth 47mm

GT5-502

Size: 130mm Nominal Impedance: 4 Ohms Power Handling, Peak: 105W Power Handling, RMS: 35W Sensitivity (2.83V/1m): 93dB Frequency Response: 70Hz – 20kHz Mounting Depth: 53mm

GT5-402

# Pair 4" Coaxial Speakers (10cm) # Proprietary Plus One cones # Vented woofer motor structure # Titanium-laminate tweeter # Improved I-Mount tweeter-mounting system # Power Handling, Peak 90W # Size 100mm # Nominal Impedance 4 Ohms # Power Handling, Peak 90W # Power Handling, RMS 30W # Sensitivity (2.83V/1m) 91dB # Frequency Response 75Hz – 20kHz # Mounting Depth 47mm

GT0-508C

* Power Handling, RMS 55 Watts * Power Handling, Peak 165 Watts * Frequency Response (±3dB) 65Hz – 21kHz * Sensitivity 91dB * Mounting Depth 57mm Midwoofer, 19mm tweeter * Cutout Diameter 120mm Midwoofer, 48mm tweeter * Impedance 2 Ohms (true 4 ohm) * Detachable Grilles

JBL P953

* 3-way car speakers for 6"x9" openings (pair) * HCL woofer cone (woven fiber glass with a Nomex core) with rubber surround * pure titanium edge-driven dome tweeter * pure titanium supertweeter * computer-optimized external crossover network * power range: 5-110 watts RMS (330 watts peak power) * frequency response: 35-23,000 Hz * sensitivity: 90 dB * top-mount depth: 3-1/4"

GTO-6527S

JBL GTO6527S 6-1/2"" (160mm) 3-way loudspeaker with Plus One® woofer cone, My-TiT tweeter, tweeter level control and Low-Q design. Plus One (patent pending) Woofer Cone - The GTO6527S has a cone with more surface area than competing models of the same size. The benefits of Plus One are greater efficiency and bass output. Reduced Tweeter Height - All small and shallow-mount coaxial speakers are easier to install behind factory speaker grilles. Hi-Roll Rubber Surrounds - These are used to provide excellent cone-edge suspension and damping. In addition, this material will not break down due to UV contamination or moisture. My-TiT (Mylar®/Titanium Composite) Tweeters - Stiff and light and extremely efficient, JBL's new My-Ti tweeters deliver the high-frequency extension of titanium domes with the damping of composite diaphragms.

GTO-607C

* 16cm (6.0") 2-way component system with crossovers * Power Handling, RMS 70 Watts * Power Handling, Peak 210 Watts * Frequency Response (±3dB) 55Hz - 21kHz * Sensitivity 92dB * Mounting Depth 2-1/16" (53mm) Mid-Woofer, 3/4" (19mm) Tweeter * Cut-Out Diameter 5-1/16" (129mm) Mid-Woofer, 1-7/8" (48mm) Tweeter * Impedance 2 Ohms * Supplied with crossovers and grills

GTO - 6427

Sensitivity - 91 dB at 1 watt Frequency Response = 75 - 21k Hz RMS Power Range (Watts) 2-40 Peak Power Handling (Watts) - 120 Impedance (Ohms) - 2 Top-mount Depth (Inches) - 1 3/4 Bottom-mount Depth (Inches) - 1 15/16

GTO - 327

* Peak: 150 watts per pair / 75 watts each * RMS: 50 watts per pair / 25 watts each # Plus One woofer cones provide more surface area than competing models of the same size and produce a more efficient woofer that can produce larger bass. # My-Ti (Mylar/titanium composite) tweeters # Impedance: 2 ohms # Sensitivity: 89 dB # Frequency Response: 90 to 20,000 Hz

GTO - 938

Power Handling, RMS - 100 Watts Power Handling, Peak - 300 Watts Frequency Response (±3dB)= 45Hz – 21kHz Sensitivity - 94db Mounting Depth -74mm Cutout Diameter - 151mm x 221mm Impedance -2 Ohms

GTO - 628

Power Handling, RMS -60 Watts Power Handling, Peak -180 Watts Frequency Response (±3dB)=50Hz – 21kHz Sensitivity -92dB Mounting Depth -52mm Cutout Diameter -130mm Impedance -2 Ohms

GTO - 6528S

Power Handling, RMS 55 Watts Power Handling, Peak 165 Watts Frequency Response (±3dB) 55Hz – 21kHz Sensitivity 92dB Mounting Depth 44mm Cutout Diameter 145mm Impedance 2 Ohms

GTO - 528

Power Handling, RMS 55 Watts Power Handling, Peak 165 Watts Frequency Response (±3dB) 55Hz – 21kHz Sensitivity 92dB Mounting Depth 44mm Cutout Diameter 145mm Impedance 2 Ohms

GTO - 18T

1" Grand Touring Series Car Tweeter, Peak: 300 watts per pair / 150 watts each, RMS: 100 watts per pair / 50 watts each, Mylar/titanium composite dome tweeters, I-Mount for simple and versatile

JBL P550C

* 13cm (5.25") 2-way component system with crossovers * Plus One HCL woofer (woven fiber glass with a Nomex core) with rubber surround * Pure titanium edge-driven dome tweeter * Computer-optimised outboard crossover network * Peak power handling: 210 Watts * Power handling: 75 Watts RMS * Frequency response: 55Hz -23kHz * Sensitivity: 89 dB * Top-mount depth: 2-1/8" * Impedance: 4 Ohms

JBL P552

# 5-1/4" 2-way car speakers (pair) # HCL woofer cone (woven fiber glass with a Nomex core) with rubber surround # pure titanium edge-driven dome tweeter (rotates for optimum imaging) # computer-optimized external crossover network # power range: 5-55 watts RMS (165 watts peak power) # frequency response: 55-23,000 Hz # sensitivity: 89 dB # top-mount depth: 2-1/8

JBL GT5 Bass Pack

The combo consist of a pounding JBL GT5-1204BR 1100W 12" subwoofer enclosure plus a quality JBL GT5-A3001 amp to power your setup. Pack Includes: 1 x JBL GT5-A3001 Amplifier 1 x JBL GT5-1204BR Subwoofer Enclosure JBL GT5-1204BR Subwoofer # Subwoofer Type GT5-12 (300mm) # Power Handling, RMS 275W # Power Handling, Peak 1100W vSensitivity (2.83V/1m) 90dB # Frequency Response 45Hz – 150Hz # Impedance 4 Ohms # Dimensions (H x W x D) 570 x 305 x 369mm (22-7/16" x 12" x 14-1/2") # Enclosure Design Vented JBL GT5-A3001 Amplifier # Amplifier Type Class AB # RMS Power @ 1Ohm 300W # RMS Power @ 4Ohms 175W # RMS Power @ 2Ohms 225W # Peak Power 450W # Crossover (12dB/Oct., 20 – 320Hz; Sub): LP # Signal-to-Noise (dBA) 95dBA # Dimensions (H x W x D) 305 x 235 x 54mm