8013I SPEAKERS

Elements 3-Way/ Car Speaker Function Tweeter • Mid-Range Speaker/Size 7.87" /Nominal Power Handling 75 Watt RMS/Peak Power Handling 225 Watt/Frequency Response 49 Hz - 21 kHz/Sensitivity 92 dB/Impedance 4 ohm (Dual Coil)/Woofer Material Poly / Plastic/Top Mounting Depth 3.58 In.

9613I SPEAKERS

Power Handling, RMS: 100 Watts/Power Handling, Peak: 300 Watts/3-Way Speaker /Sensitivity: 92dB/Frequency Response: 46Hz - 21kHz/Mounting Depth: 3"/Impedance: 4 Ohms.

BASS LINK

Infinity, the inventor of servo-controlled subwoofer systems, has adapted the technology developed for the finest home-audio loudspeakers to create BassLink, a groundbreaking automotive powered subwoofer. BassLink sets a new standard for in-vehicle bass reproduction.Four low-level inputs provide non-fading bass. Four high-level inputs also provide non-fading bass and the ability to easily interface BassLink with most factory sound systems.BassLink can be mounted vertically or horizontally thanks to its unique mounting system. Basslink provides user-adjustable input sensitivity, crossover frequency and bass-boost, allowing BassLink's performance to be optimized for any installation.BassLink features a 200W Class D subwoofer amplifier that provides all the horsepower needed to drive the 10" subwoofer/10" passive radiator combination.

BASSLINK ||

The Infinity BASSLINK II is a 10” subwoofer equipped with a class D subwoofer amplifier. The second subwoofer in the BASSLINK series, the BASSLINK II is an upgrade from the original BASSLINK and includes an increased power output of 250w (versus 200w). The BASSLINK II, however, maintains the original BASELINK’s 20Hz-120Hz frequency response, 50Hz-120Hz variable electronic crossover, and compact dimensions of 14-1/2" x 12-1/2" x 8". The BASSLINK II does add a few additional features including square passive radiators that maximize cone area and extract additional bass, not to mention an Infinity phanton center channel control, BassLink 4sc docks, and a BassLink 4sc amplifier module that delivers four channels of power.

BASS LINK T

he Infinity BassLink T takes the features that have made the BassLink such an incredible performer, and puts them in a rigid polymer enclosure that'll fit neatly in most SUVs, trucks, or hatchbacks. At less than 15" high and 7" deep, this compact amplified subwoofer takes up minimal cargo space!Fire up the built-in 250-watt Class D amplifier, and check out the rich, powerful bass produced by the 10" subwoofer in tandem with two 10" passive radiators — it's sure to make your music sound massive. The BassLink T connects to any type of system (thanks to its speaker- and preamp-level inputs), and can be tuned to perfection using the variable low-pass filter, bass boost, gain control, and phase switch. If you lease your truck, this sub will add serious slam to your factory system — without any modifications. A remote is included.

INFINITY 50.7CS SPEAKERS

Plus One woofer cones - this patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency.Edge-driven MMD dome tweeter - these are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer.Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yields very low distortion and improved clarity, an Infinity trademark.SLI high-output design. Conventional 4-ohm speakers do not leverage all of the power available from today's car audio amplifiers and high-powered head units. This topology extracts every last watt from the amplifier source, increasing overall system output and efficiency.Each Kappa multielement and component system features a crossover that has been voice-matched using audiophile grade air core inductors and polypropylene capacitors. The result is flawless performance with incredible detail and accuracy.Each Kappa component system features a user adjustable tweeter level control on the passive crossover.

INFINITY 60.7CS SPEAKERS

Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. Edge-driven MMD dome tweeter - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark. SLI high-output design. Conventional 4-ohm speakers do not leverage allof the power available from today's car audio amplifiers and high-powered head units. This topology extracts every last watt from the amplifier source, increasing overall system output and efficiency. Computer-optimized voice-matched crossovers - Each Kappa multielement and component system features a crossover that has been voice-matched using audiophile grade air core inductors and polypropylene capacitors. The result is flawless performance with incredible detail and accuracy. Adjustable tweeter level-Each Kappa component system features a user adjustable tweeter level control on the passive crossove

REF 6822CF

* 6" x 8" / 5" x 7" 2-way speaker system * Plus One® woofer cones * Edge-Driven Textile Dome Tweeter * Includes Spacers for 6 x 8" Applications * Sensitivity: 93 dB * Frequency Response: 49-21,000 Hz * Recommended RMS Power: 60W * Peak Power Handling: 180W * Impedance 2 ohms * Mounting Depth 2-3/8" (60mm) * Custom fit speakers for Ford Focus, Mondeo,Mazda vehicles etc * Sold in pairs (grills not included)

REF4022I

* 4" two-way loudspeaker * Plus One polypropylene woofer cone * Edge-driven textile dome tweeter * Unipivot rotating tweeter * Adjustable tweeter level * Sensitivity: 92 dB * Power Handling, Peak: 105 Watts * Power Handling, RMS: 35 Watts * Frequency Response: 85kHz - 21kHz * Mounting Depth: 1-15/16" * 2 Ohms voice coils

REF5022I

* 5 1/4" two-way loudspeaker * Plus One polypropylene woofer cone * Edge-driven textile dome tweeter * Unipivot rotating tweeter * Adjustable tweeter level * Sensitivity: 92 dB * Power Handling, Peak: 135 Watts * Power Handling, RMS: 45 Watts * Frequency Response: 67kHz - 21kHz * Mounting Depth: 2-1/4" * 2 Ohms voice coils

REF6522I

* 2-way 6.5" (16.5cm) speakers (pair) * Plus One woofer cone with rubber surround * edge-driven silk dome tweeter * power range: 2-60 watts RMS (max power 180 watts) * frequency response: 53Hz-21,000 Hz * sensitivity: 93 dB * Impedance 2 ohms * Mounting Depth 2-1/16" (52mm) * Sold in pairs with speaker grills

REF6522SI

* 2-way 6.5" (16.5cm) shallow mount speakers (pair) * Plus One woofer cone with rubber surround * edge-driven silk dome tweeter * power range: 2-60 watts RMS (max power 180 watts) * frequency response: 53Hz-21,000 Hz * sensitivity: 93 dB * Impedance 2 ohms * Mounting Depth 1-15/16" (48mm) * Sold in pairs with speaker grills

REF6020CS

* 6 1/2" two-way component system * Plus One injection molded polypropylene woofer cone * 1 " edge-driven textile dome tweeter * Optimized passive crossover with tweeter adjustment * I-Mount tweeter mounting kit and Starfish adapter included * Sensitivity: 93 dB * Power Handling, Peak: 270 Watts * Power Handling, RMS: 90 Watts * Frequency Response: 53Hz - 21kHz * Mounting Depth: 1-15/16" * 2 Ohms voice coils

REF6520SCS

Power Handling, RMS 90 watts Power Handling, Peak 270 watts Sensitivity (2.83V @ 1m) 93dB Frequency Response 53Hz - 21kHz Impedance 2,7 ohms Mounting Depth 53mm

REF6520CS

* Power Handling, RMS - 90 watts * Power Handling, Peak - 270 watts * Sensitivity (2.83V @ 1m) - 93dB * Frequency Response - 58Hz-21kHz * Impedance - 2.65 ohms * Mounting Depth - 60mm

REF5020CS

* 5 1/4" two-way component system * Plus One injection molded polypropylene woofer cone * 1 " edge-driven textile dome tweeter * Optimized passive crossover with tweeter adjustment * I-Mount tweeter mounting kit and Starfish adapter included * Sensitivity: 92 dB * Power Handling, Peak: 225 Watts * Power Handling, RMS: 75 Watts * Frequency Response: 67Hz - 21kHz * Mounting Depth: 2-1/4" * 2 Ohms voice coils